EXPLORE THE TOPIC
Practical explanations and perspectives to help you build your understanding.
Risk Assessment Standards: How to Choose and Use Them. The standard is the thing that we’re going to use to achieve things – the tool. And that’s important because tools designed to do certain things usually perform well. But they don’t always perform well on other things. So we will ask, ‘Are we doing the […]
Read articleIn this ‘super post’, we will learn System Safety Analysis: Methods, Tasks and Techniques. I will show you thirteen lessons that explain each of the ten analysis tasks, the analysis process, and how to combine those tasks into a program! Follow the links to sample and buy lessons on individual tasks. Introduction Military Standard 882, […]
Read articleIn this video lesson, I look at Sub-System Hazard Analysis with Mil-Std-882E (SSHA, which is Task 204). I teach the mechanics of the task, but not just that. I’m using my long experience with this Standard to teach a pragmatic approach to getting the work done. Task 204 is one of three tasks that integrate […]
Read articleIn this 45-minute session, I look at System Hazard Analysis with Mil-Std-882E. SHA is Task 205 in the Standard. I explore Task 205’s aim, description, scope, and contracting requirements. I also provide commentary, based on working with this Standard since 1996, which explains SHA. How to use it to complement Sub-System Hazard Analysis (SSHA, Task […]
Read articleIn this video lesson, I look at Sub-System Hazard Analysis with Mil-Std-882E (SSHA, which is Task 204). I teach the mechanics of the task, but not just that. I’m using my long experience with this Standard to teach a pragmatic approach to getting the work done. Task 204 is one of three tasks that integrate […]
Read articleIn this 45-minute session, I look at System Hazard Analysis with Mil-Std-882E. SHA is Task 205 in the Standard. I explore Task 205’s aim, description, scope, and contracting requirements. I also provide commentary, based on working with this Standard since 1996, which explains SHA. How to use it to complement Sub-System Hazard Analysis (SSHA, Task […]
Read articleWelcome to Module Five, More Resources for Risk Assessment. We’re on the home straight now! This is the last of the five modules. I will let you know where to get more resources and help on these topics. Course Learning Objectives More Resources for Risk Assessment: Transcript Copyright/Source Statement “First, I want to point out […]
Read articleDesigning Your Risk Assessment Program. Which Ingredients should we use? In this post, I draw upon my 25+ years in system safety to give you some BOLD advice! I’m going to dare to suggest which analysis tasks are essential to every System Safety Program. I also suggest which tasks are optional depending on the system […]
Read articleWhen Understanding Your Risk Assessment Standard, we need to know a few things. The standard is the thing that we’re going to use to achieve things – the tool. And that’s important because tools designed to do certain things usually perform well. But they don’t always perform well on other things. So we will ask, […]
Read articleThis is the full-length (one hour) session on Environmental Hazard Analysis (EHA), which is Task 210 in Mil-Std-882E. I explore the aim, task description, and contracting requirements of this Task, but this is only half the video. In the commentary, I then look at environmental requirements in the USA, UK, and Australia, before examining how […]
Read articleIn this full-length (38-minute) session, The Safety Artisan looks at System of Systems Hazard Analysis, or SoSHA, which is Task 209 in Mil-Std-882E. SoSHA analyses collections of systems, which are often put together to create a new capability, which is enabled by human brokering between the different systems. We explore the aim, description, and contracting […]
Read articleIn this full-length (55-minute) session, The Safety Artisan looks at Health Hazard Analysis, or HHA, which is Task 207 in Mil-Std-882E. I explore the aim, description, and contracting requirements of this complex Task. It covers: physical, chemical & biological hazards; Hazardous Materials (HAZMAT); ergonomics, aka Human Factors; the Operational Environment; and non/ionizing radiation. I will […]
Read articleIn this full-length session, I look at Operating & Support Hazard Analysis, or O&SHA, which is Task 206 in Mil-Std-882E. I explore Task 206’s aim, description, scope, and contracting requirements. There’s value-adding commentary, which explains O&SHA: how to use it with other tasks; how to apply it effectively on different products; and some of the […]
Read articleIn this 45-minute session, I’m looking at System Requirements Hazard Analysis, or SRHA, which is Task 203 in the Mil-Std-882E standard. I will explore Task 203’s aim, description, scope, and contracting requirements. SRHA is an important and complex task, which must be done on several levels to succeed. This video explains the issues and discusses […]
Read articleIn this video, I look at Functional Hazard Analysis with Mil-Std-882E (FHA, which is Task 208 in Mil-Std-882E). FHA analyses software, complex electronic hardware, and human interactions. I explore the aim, description, and contracting requirements of this Task, and provide extensive commentary on it. (I refer to other lessons for special techniques for software safety […]
Read articleIn this 45-minute session, I look at how to do a Preliminary Hazard Analysis with Mil-Std-882E. Preliminary Hazard Analysis, or PHA, is Task 202 in the Standard. I explore Task 202’s aim, description, scope, and contracting requirements. There’s value-adding commentary, and I explain the issues with PHA – how to do it well and avoid […]
Read articleWant to know how to perform Preliminary Hazard Identification with Mil-Std-882E? (This is Task 201 under the standard.) This is the first step in safety assessment. We look at three classic complementary techniques to identify hazards and their pros and cons. This includes all the content from Task 201, and also practical insights from my […]
Read articleIn this ‘super post’, we will Learn How to Perform System Safety Analysis. I will show you thirteen lessons that explain each of the ten analysis tasks, the analysis process, and how to combine those tasks into a program! Follow the links to sample and buy lessons on individual tasks. Introduction Military Standard 882, or […]
Read articleThe System Safety Engineering Process – what it is and how to do it. This is the full-length (50-minute) session on the System Safety Process, which is called up in the general requirements of Mil-Std-882E. I cover the Applicability of Mil-Std-882E tasks, the General Requirements, the Process with eight elements, and the Application of process […]
Read articleLearn How to Understand Safety Standards with this FREE session from The Safety Artisan. In this module, Understanding Your Standard, we’re going to ask the question: Am I Doing the Right Thing, and am I Doing it Right? Standards are commonly used for many reasons. We need to understand our chosen system safety engineering standard, in […]
Read articleLearn about System Safety Risk Assessment with The Safety Artisan. In this module, we’re going to look at how we deal with the complexity of the real world. We do a formal risk analysis because real-world scenarios are complex. The Analysis helps us to understand what we need to do to keep people safe. Usually, […]
Read article
